Trusted Protection For The Marine Industry
CanFix® Emergency Repair Kit
CanFix Emergency Repair Kit CanFix Emergency Repair Kit is a complete system for making emergency repairs to a wide variety of pipe materials. CanFix consists of a patented, fiberglass cloth impregnated with water activated resin that sets in minutes with no measuring, mixing, or messy cleanup. Each kit contains a roll of CanFix cloth, a ‘two part epoxy’ for filling and sealing, a pair of latex gloves, and complete instructions for use.
 
Approved
and used
by the
US Navy and
Coast Guard
Applications

– Riser Exhaust

– Leaking Hydraulic Lines

– Water Cooling Hoses & Fluid Lines

– Leaking Steam Lines & Fittings

– Corrosion Protection Coating

– Repair Broken Tool Handles, etc.

– Emergency Repairs to Fuel Lines

CanFix Emergency Repair Kit product specification chart

 Specifications

– Max. Pres. Retained (8 layers applied): 1,000 psi

– Tensile Strength: 24,900 psi

– Flexural Strength: 16,100 psi

– Compression Strength: 26,600 psi

– Dielectric Strength: 16,060 volts

– Heat Resistant: 500°F (intermittent)

– Colour: White or grey

– Setting Time @ 70 Deg. F: 30 min

– Setting Time @ 42 Deg. F: 3 hours

– Setting Time @ 35 Deg. F: 6.5 hours
Application Instructions
1.) Release water pressure if applicable
 
2.) Clean and roughen area to be repaired
 
3.) Press epoxy into crack or crevice to be repaired
 
4.) Wearing enclosed gloves, soak CanFix
Tape in temperate water for 20 seconds
 
5.) Using entire roll, wrap CanFix approx. 2.0 in.
above repair area and continue wrapping
approx. 2.0 in. below repair
 
6.) Squeeze and mold CanFix in the direction
of the wrap, removing excess water and
spreading resin until tacky to the touch
 
7.) Allow 30 minutes to completely cure (@ 70°F)