Trusted Protection For The Marine Industry
PetroWrap® Anti-Corrosion Tape
PetroWrap Primer Paste is a preparatory primer that displaces moisture, pacifies oxides, and fills small irregularities that occur on the surface to be wrapped with PetroWrap® Anti-Corrosion Tape.PetroWrap Mastic is a cold applied filler which profiles areas to be tape wrapped by easing contours on pipe joints, flanges, bolts, and other irregular shapes to be wrapped with PetroWrap® Anti-Corrosion Tape.PetroWrap Anti-Corrosion Tape consists of a non-woven, stitch bonded, synthetic fabric which has been fully impregnated with neutral petrolatum based compounds and inert fillers.

The PetroWrap® Anti-Corrosion System has been developed for long term protection of metal surfaces that are underground, underwater, or exposed - even in the most severe environments. It consists of a cold applied system of petrolatum-based PetroWrap® Anti-Corrosion Tape, PetroWrap® Primer, and, where contouring is necessary, PetroWrap® Mastic. PetroWrap® adheres to surfaces without heating, even on damp and/or indifferently prepared areas.
  The System
a PetroWrap® Primer Paste is a preparatory primer that displaces moisture, pacifies oxides, and fills small irregularities that occur on the surface to be wrapped with PetroWrap® Anti-Corrosion Tape.
 
b PetroWrap® Mastic is a cold applied filler which profiles areas to be tape wrapped by easing contours on pipe joints, flanges, bolts, and other irregular shapes to be wrapped with PetroWrap® Anti-Corrosion Tape.
 
c PetroWrap® Anti-Corrosion Tape consists of a non-woven, stitch bonded, synthetic fabric which has been fully impregnated with neutral petrolatum based compounds and inert fillers.
 
Applications
– Steel pipes, flanges
   and valves

– Welded pipe joints

– Cooling tower piping

– Pipe crossings

– Tank bases

– Waterproofing &
   sealing

– Fire protection

– Pipe & sprinkler
   systems

– Electrical connection
   boxes

– Cable splices

– Hydraulic pipes,
   valves & fittings

– Marine pilings

 Specifications
– Can be applied on wire-brushed
   surfaces

– Repels water, salt, alkalis and
   acids

– Protects new or corroded
   surfaces

– Temperature variances from
   -40º C to +84º C

– Will not crack, peel or harden

– Non-toxic and environmentally
   friendly (Meets AWWA C217
   Standard)

 PetroWrap Anti-Corrosion Tape product specifications chartPetroWrap Anti-Corrosion Tape assembly cutaway
Application Instructions PDF Downloads
1.) Remove all contaminants such as dirt, oil, scale and excessive moisture.
 
2.) Brush Petrowrap® Primer A evenly over surface to displace remaining moisture and ensure proper adhesion.
 
3.) Press Petrowrap® Mastic B into surface irregularities to eliminate air pockets.
 
4.) Wrap Petrowrap® Tape C spirally around prepared surface using even tension. An overlap of 55% is recommended to assure total protection.
 
5.) Finish with Petrowrap® Overwrap D applied like Petrowrap® Tape to prevent mechanical damage as required.

PETROWRAP PRODUCTS

PetroWrap Anti-Corrosion Tapes

PetroWrap Mastic

Petrowrap Primer Paste

PRODUCT INFORMATION

Petrowrap Calculation Chart

Petrowrap Mastic Calculation Chart

Physical Properties

Material Safety Data Sheets